RANGE OPTIONS
The Multiboost range has been designed and built by our team to cater for every eventuality, based on what our customers have asked.
No matter what the application, the volume of water required, the pressure you need, or the size of your property – rest assured we have an integrated and compact solution for you.
Our job is to enable you to safely store the volume of water you require and deliver it at the right pressure, whenever you need it. That’s how we help you to solve your pressure and flow problems.
Fixed Speed (Presflo Multi)
This is the most economic option and will transform the water pressure and flow in your property. This will deliver the full pressure of the pump at the in use flow rate.
The updated version of the Presflo Multi now comes with an integrated 1-litre expansion tank, adjustable cut-in pressure and adjustable amp settings
- Designed for smaller properties (1-2 bathrooms)
- Increased pressure and flow
- 40lpm @ 3 Bar
Fixed Speed (Easy Press)
Easy Press features a pressure sensor and a flow sensor linked to an electronic system that automatically activates the pump when a tap’s opening lowers the pressure below a specified level and deactivates it when the flow stops or dips under 2 L/min.
The integrated electronics protect the pump from dry running; frequent start-ups due to leaks in the system; lockout due to plant inactivity, cut-in pressure is preset to 2.2 Bar.
- Designed for smaller properties (1-2 bathrooms)
- Increased pressure and flow
- 40lpm @ 3 Bar
Variable Speed (SteadyPres)
The variable speed option allows you to choose your desired pressure, speeding up and slowing down to suit demand.
Whatever you are doing – washing up, watering the garden, having a shower – or all 3 together – the pressure will continue to be the same to give you constant pressure at every outlet with adjustable operating settings.
- Designed for larger properties (3+ bathrooms)
- Increased pressure and flow
- 80lpm @ 3 Bar
BEST PRACTICE FOR WATER INFRASTRUCTURE
Ref: Uisce Éireann Regulations for Booster Units (CDS-5020-03)
3.28 Water Storage
Only indirect plumbing systems should be provided in internal water distributions systems i.e. all appliances shall be plumbed from a cold-water storage tank and supplied by gravity. The benefits of such indirect systems relate to ensuring that adequate storage capacity is available to serve all appliances within the Premises.
The plumbing and water storage requirements for premises should be in accordance with the current version of the Building Regulations and/or with the requirements of the relevant Local Authority’s Plumbing Regulations and Bye-Laws, if such exist. In many instances, the Local Authority will require arrangements to be made to have internal plumbing inspected and approved by a Local Authority representative. All Developments over two storeys in height or requiring a supply pressure greater than 15m head at the Curtilage of the property must comply with the requirements of Section 3.13 above. Specific agreement will be required from Uisce Éireann and the relevant Local Authority as necessary. As a general rule, storage of 24-hour maximum daily consumption should be provided. The minimum water storage requirement for commercial, industrial or manufacturing purposes shall be calculated on a 24-hour or maximum daily consumption basis. General guidelines for domestic premises are shown below in the following Table.
TANK SIZING GUIDE
Minimum cold water storage for new developments using low flush & dual flush WCs
Dwelling house or apt. (up to 3 bed without power shower) – 227L
Dwelling house or apt. (4 bed or single power shower) – 340L
Dwelling house or apt. (having 2 full bathrooms) – 682L
Additional water storage per shower en-suite in the above – 90L
